Shower Remodel Cost in Reno & Sparks, NV
As of September 2026, a shower remodel in the Reno/Sparks area typically costs $3,500 to $15,000, usually taking 1–4 weeks. Reno Bathroom Pro matches you with an independent, licensed local remodeler at no cost to you.
What Drives Shower Remodel Cost
A basic prefab shower kit — a fiberglass or acrylic pan and surround — typically runs $2,000–$8,000 installed. A fully custom walk-in shower with tile, a frameless glass enclosure, and a built-in niche or bench often averages around $7,875 and can exceed $15,000 for a large or premium build. National estimates put the average walk-in shower project around $9,000, with a typical range of $6,000–$12,000. The single biggest cost driver is the choice between a prefab kit and custom tile — not labor rates, which are relatively stable across most local remodelers.
No Reno-area remodeler publishes a single flat rate for a walk-in shower, and for good reason — tile selection, glass configuration, and whether plumbing needs to move all shift the number meaningfully. Get a written, itemized quote from your matched remodeler rather than comparing bare "starting at" figures across companies.
What a Shower Remodel Typically Involves
Removing the old shower pan, surround, and any damaged wall backing; addressing any moisture damage found underneath (a common surprise on older Reno-area homes); installing new waterproofing membrane; setting a new pan or tile base; installing wall tile or a prefab surround; and hanging a glass enclosure or shower curtain rod. If the shower's footprint or plumbing location changes, expect additional plumbing work and, depending on scope, a permit through the shared Reno/Sparks/Washoe County regional portal.
Shower Remodel vs. Tub-to-Shower Conversion
If you already have a shower and want to upgrade it, this page's figures apply. If you currently have a bathtub and want to replace it with a shower entirely, that's a tub-to-shower conversion — a related but distinct project with its own cost range and plumbing considerations. See our tub-to-shower conversion cost guide for that project type, or the full cost guide to compare all project types side by side.
Sources: USA Bath, tubsafe.com, Angi, Home Depot, and bathroomremodelcentral.com (RENO-027), verified 2026-09-16.
Frequently Asked Questions
How much does a shower remodel cost in Reno or Sparks, NV? +
As of September 2026, a shower remodel in the Reno/Sparks area typically costs $3,500–$15,000, usually taking 1–4 weeks depending on whether it's a prefab replacement or a fully custom tiled walk-in shower (RENO-045).
What's the difference between a shower remodel and a tub-to-shower conversion? +
A shower remodel replaces or upgrades an existing shower — a new pan, surround, glass, or tile. A tub-to-shower conversion removes a bathtub entirely and replaces it with a shower, which usually involves different plumbing work. See our tub-to-shower conversion page for that project's specific cost range.
Why is there such a wide price range for a walk-in shower? +
A basic prefab shower kit can run $2,000–$8,000, while a fully custom tiled walk-in shower with frameless glass often runs $7,875 or more, sometimes exceeding $15,000. The gap is almost entirely about materials (prefab vs. custom tile) and glass enclosure style, not labor.
Do I need a permit for a shower remodel in Reno or Sparks? +
Permit requirements depend on the scope of work, particularly whether plumbing lines move. Reno, Sparks, and Washoe County share a single regional permitting portal (onenv.us) — your matched remodeler can confirm what your specific project requires.
Is my call recorded? +
Your call may be recorded for quality and matching purposes, consistent with Nevada's call-recording consent requirements.
Get Matched With a Local Remodeler
Free, no-obligation. Reno Bathroom Pro is an independent referral service operated by AuthenitcBrand, LLC. We connect homeowners with independent, licensed local bathroom remodeling contractors — we are not a contractor and do not perform remodeling work ourselves.